New pages

10:16, 16 April 2023 ‎Cluster knot (hist | edit) ‎[970 bytes] ‎Peter wood (talk | contribs) (Created page with "Multiple knots in close proximity to each other, also known as cluster knots, occur when several small branches emerge from the tree trunk in close proximity and become embedded in the growing wood. As the tree grows, the knots become more pronounced and can be visible on the surface of the lumber. Cluster knots are more common in certain tree species, such as pine and spruce, and can affect the strength and appearance of the wood. The presence of cluster knots can weak...")
10:11, 16 April 2023 ‎Double knot (hist | edit) ‎[1,265 bytes] ‎Peter wood (talk | contribs) (Created page with "Double knots, also known as twin knots, occur when two branches emerge from the tree trunk in close proximity to each other and eventually become embedded in the growing wood. As the tree grows, the knots become more pronounced and can be visible on the surface of the lumber. Double knots are more common in certain tree species, such as pine and spruce, and can affect the strength and appearance of the wood. The presence of double knots can weaken the wood and reduce it...")
12:40, 29 March 2023 ‎Overlay Flooring (hist | edit) ‎[411 bytes] ‎Peter wood (talk | contribs) (Created page with "On the other hand, overlay flooring is a more modern type of timber flooring where thinner boards of around 10mm to 14mm in thickness are laid over an existing subfloor, such as concrete or plywood. This type of flooring is more commonly used for renovation projects where the existing subfloor cannot be removed. Overlay flooring is also easier and quicker to install compared to Structural Strip Flooring.")
12:37, 29 March 2023 ‎Structural Strip Flooring (hist | edit) ‎[799 bytes] ‎Peter wood (talk | contribs) (Created page with "Structural strip flooring refers to a traditional method of installing timber flooring where solid timber boards are fixed directly to the floor joists or bearers. This type of flooring is generally thicker, with boards typically measuring between 19mm to 22mm in thickness. Structural strip flooring is considered to be a more durable and long-lasting flooring option as it can withstand heavy foot traffic and can be sanded and refinished multiple times throughout its life...")
06:42, 29 March 2023 ‎Stencil 1 (hist | edit) ‎[589 bytes] ‎Peter wood (talk | contribs) (Created page with "<div style="border: 3px double #ccc; float:right; width:20%; background-color:#f2f2f2; padding:20px;"> <h3 style="border: 3px double #ccc; padding: 10px; text-align: center; background-color: #f0f8ff ;">Places to purchase</h3> <h3 style="border: 3px double #ccc; padding: 10px; text-align: center; background-color: #f0f8ff ;">Related Products</h3> <h3 style="border: 3px double #ccc; padding: 10px; text-align: center; background-color: #f0f8ff ;">Links to other siz...")
06:12, 29 March 2023 ‎Joist Hangers (hist | edit) ‎[600 bytes] ‎Peter wood (talk | contribs) (Created page with "Steel joist hangers are commonly used to connect wood joists to wood framing or wood headers in construction. They are typically used in situations where a joist needs to be attached to a supporting beam or header, such as in the construction of decks, roofs, or floors. The steel hanger is installed by nailing or screwing it to the wood framing or header, and then inserting the wood joist into the hanger. The hanger provides a secure connection between the joist and the...")
01:32, 29 March 2023 ‎Template Page 1 (hist | edit) ‎[248 bytes] ‎Peter wood (talk | contribs) (Created page with "== Short Info Box == {{Short Info Box | image = Blueberries.jpg | image_caption = ''Vaccinium caesariense'' | taxon = Vaccinium sect. Cyanococcus | authority = Rydb. | subdivision_ranks = Species | subdivision = See text }}")
23:57, 28 March 2023 ‎AS 1604.1-2012 (hist | edit) ‎[88 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 1604.1-2012: Specification for preservative treatment - Part 1: Sawn and round timber")
23:56, 28 March 2023 ‎AS 1720.3-2016 (hist | edit) ‎[57 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 1720.3-2016: Timber structures - Design for wind loads")
23:56, 28 March 2023 ‎AS 1720.2-2016 (hist | edit) ‎[53 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 1720.2-2016: Timber structures - Timber properties")
23:55, 28 March 2023 ‎AS 3848-2004 (hist | edit) ‎[69 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 3848-2004: Timber - Performance of timber-framed windows and doors")
23:55, 28 March 2023 ‎AS/NZS 1748:2015 (hist | edit) ‎[70 bytes] ‎Peter wood (talk | contribs) (Created page with "AS/NZS 1748:2015: Timber - Solid stress-graded for structural purposes")
23:55, 28 March 2023 ‎AS 4063-2010 (hist | edit) ‎[73 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 4063-2010: Timber - Methods of testing small clear specimens of timber")
23:54, 28 March 2023 ‎AS 1684.2-2010 (hist | edit) ‎[59 bytes] ‎Peter wood (talk | contribs) (Created page with "Residential timber-framed construction - Non-cyclonic areas")
23:52, 28 March 2023 ‎AS 1720.1-2010 (hist | edit) ‎[50 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 1720.1-2010: Timber structures - Design methods")
23:51, 28 March 2023 ‎AS 4785.2-2004 (hist | edit) ‎[88 bytes] ‎Peter wood (talk | contribs) (Created page with "AS 4785.2-2004: Timber - Softwood - Stress grades and sawn sizes for structural purposes")
03:30, 20 March 2023 ‎Test.php (hist | edit) ‎[19 bytes] ‎Peter wood (talk | contribs) (Created page with "<?php phpinfo(); ?>")
17:41, 17 March 2023 ‎Combination of Features (hist | edit) ‎[525 bytes] ‎Peter wood (talk | contribs) (Created page with "A combination of features refers to flaws that the lumber possesses. These features can include any natural defects such as knots or cracks. For example, a piece of timber may have a combination of features such as a straight grain pattern, a light color, and minimal knots. Alternatively, another piece of lumber may have a combination of features such as a wavy grain pattern, a dark color, and several knots. The combination of features in lumber can affect the strength...")
11:32, 17 March 2023 ‎Knot (hist | edit) ‎[979 bytes] ‎Peter wood (talk | contribs) (Created page with "A knot is a round, dark-colored section in a piece of wood where a branch grew. When trees are harvested and processed into lumber, the knots are cut out or left in the wood, depending on the desired final product. Knots can have different effects on the strength and appearance of the lumber. Small, tight knots may not affect the strength of the wood significantly and can add character to the appearance of the lumber. However, larger knots can weaken the wood and may ca...")
07:12, 17 March 2023 ‎Pinus (hist | edit) ‎[909 bytes] ‎Peter wood (talk | contribs) (Created page with "Pinus is a genus of coniferous trees that is commonly known as pine. It is one of the largest genera of conifers and includes around 120 species of trees and shrubs that are native to the Northern Hemisphere. Pines are known for their evergreen needles, which are bundled in clusters called fascicles, and their distinctive cones, which can range in size from small and round to large and elongated. The bark of pine trees is often scaly or furrowed and can vary in color fr...")
07:10, 17 March 2023 ‎Tongue and Groove Joint (hist | edit) ‎[1,070 bytes] ‎Peter wood (talk | contribs) (Created page with "A tongue and groove joint is a type of woodworking joint that is used to connect two boards edge-to-edge. The joint consists of a tongue, which is a protruding ridge on one board, that fits into a corresponding groove, or channel, on the other board. The tongue and groove fit snugly together, creating a strong, interlocking joint that can provide stability and support for a variety of applications. Tongue and groove joints are commonly used in flooring, paneling, and wa...")
03:22, 17 March 2023 ‎Copper Chrome Arsenic (hist | edit) ‎[1,359 bytes] ‎Peter wood (talk | contribs) (Created page with "Copper Chrome Arsenic (CCA) is a type of water-borne preservative that has been widely used in the past to protect wood products against decay and insect damage. CCA is a mixture of copper, chromium, and arsenic, and is highly effective in preventing fungal decay and insect infestations in wood. CCA-treated wood has been commonly used in a variety of outdoor applications, including decking, fences, playground equipment, and utility poles. The treatment process involves...")
03:15, 17 March 2023 ‎Water-borne preservative (hist | edit) ‎[1,228 bytes] ‎Peter wood (talk | contribs) (Created page with "Water-borne preservatives are a class of preservatives that are soluble in water and are used to protect wood products against decay and insect damage. These preservatives are commonly used in pressure-treated lumber and other wood products that will be exposed to moisture. Some common examples of water-borne preservatives include: Copper-based preservatives: These include copper sulfate, copper oxide, and ammoniacal copper quaternary (ACQ). Copper-based preservatives...") originally created as "Water-bourne Preservatives"
02:31, 17 March 2023 ‎R/H (hist | edit) ‎[26 bytes] ‎Peter wood (talk | contribs) (Redirected page to Rougher Header) Tag: New redirect
02:28, 17 March 2023 ‎Rough Header (hist | edit) ‎[950 bytes] ‎Peter wood (talk | contribs) (Created page with "Rougher Header (R/H) is a type of sawmill machine used in the timber industry to create rough sawn timber. Rough sawn timber is wood that has been sawn from logs into rough, unfinished boards, without further processing such as planing or sanding. The Rougher Header machine is used to create rough sawn timber with a specific profile, such as the familiar "V" shape often seen on the top and bottom edges of timber. The machine uses multiple blades to cut the timber into t...")
02:26, 17 March 2023 ‎Pencil Round (hist | edit) ‎[744 bytes] ‎Peter wood (talk | contribs) (Created page with "A "pencil round" is a type of edge treatment that involves rounding the corners of the timber to create a smooth, curved edge. The term "pencil" refers to the size of the curve, which is typically quite small and subtle. This edge treatment can be applied to all four corners of the timber, resulting in what is referred to as "pencil round four corners". This type of edge treatment is often used for aesthetic purposes, as it creates a more finished and polished look to t...")
01:31, 17 March 2023 ‎Getting Started (hist | edit) ‎[755 bytes] ‎Peter wood (talk | contribs) (Created page with "<strong>MediaWiki has been installed.</strong> Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software. == Getting started == * [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list] * [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ] * [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikime...")
01:20, 17 March 2023 ‎70 x 35 (hist | edit) ‎[1,346 bytes] ‎Peter wood (talk | contribs) (Created page with "70mm x 35mm timber is a relatively small and lightweight structural timber used in various applications in construction, particularly in residential projects. One common use for 70mm x 35mm timber is as a stud for interior walls. The timber's size is adequate to support the weight of the wall and its contents, but not heavy enough to support the weight of a roof or floor. It is also used for partition walls, where it is not required to support significant loads. Additi...") Tag: Visual edit
01:19, 17 March 2023 ‎70 x45 (hist | edit) ‎[1,346 bytes] ‎Peter wood (talk | contribs) (Created page with "70mm x 45mm timber is a relatively small and lightweight structural timber used in various applications in construction, particularly in residential projects. One common use for 70mm x 45mm timber is as a stud for interior walls. The timber's size is adequate to support the weight of the wall and its contents, but not heavy enough to support the weight of a roof or floor. It is also used for partition walls, where it is not required to support significant loads. Additi...") Tag: Visual edit
01:18, 17 March 2023 ‎90 x 35 (hist | edit) ‎[2,662 bytes] ‎Peter wood (talk | contribs) (Created page with "90mm x 35mm timber is a commonly used size of structural timber in Australia. While it may not be suitable for heavier load-bearing applications such as floor joists or roof rafters, it can be used for a variety of other applications in residential and commercial building projects. One common use of 90mm x 35mm timber is as a wall stud. Studs are vertical structural members that support the weight of the walls and are typically spaced at regular intervals along the leng...") Tag: Visual edit
00:49, 17 March 2023 ‎90 x 45 (hist | edit) ‎[2,117 bytes] ‎Peter wood (talk | contribs) (Created page with "One common use of 90mm x 45mm timber is as a wall stud. Studs are vertical structural members that support the weight of the walls and are typically spaced at regular intervals along the length of the wall. 90mm x 45mm timber is also used for framing smaller structures such as garden sheds, pergolas, and fences. In addition to wall framing, 90mm x 45mm timber can be used for bracing, which involves adding diagonal or horizontal members to reinforce the structure against...") Tag: Visual edit
00:46, 17 March 2023 ‎140 x 35 (hist | edit) ‎[1,971 bytes] ‎Peter wood (talk | contribs) (Created page with "140mm x 35mm timber is a common size for structural timber used in construction in Australia. It is often used as a joist or bearer in residential and commercial building projects. Joists are horizontal structural members that support the flooring system, while bearers are horizontal structural members that support the weight of the structure above them, such as the walls and roof. 140mm x 35mm timber is typically made from softwood species, such as pine or spruce, and...") Tag: Visual edit
00:44, 17 March 2023 ‎140 x 45 (hist | edit) ‎[2,243 bytes] ‎Peter wood (talk | contribs) (Created page with "140mm x 45mm timber is a common size for structural timber used in construction in Australia. It is often used as a joist, bearer, or lintel in residential and commercial building projects. Joists are horizontal structural members that support the flooring system, while bearers are horizontal structural members that support the weight of the structure above them, such as the walls and roof. Lintels, on the other hand, are horizontal structural members that span over doo...") Tag: Visual edit
00:41, 17 March 2023 ‎190 x 35 (hist | edit) ‎[1,702 bytes] ‎Peter wood (talk | contribs) (Created page with "190mm x 35mm is a common size for structural timber used in construction in Australia. It is often used as a joist or bearer in residential and commercial building projects. Joists are horizontal structural members that support the flooring system, while bearers are horizontal structural members that support the weight of the structure above them, such as the walls and roof. 190mm x 35mm timber is typically made from softwood species, such as pine or spruce, and is com...") Tag: Visual edit
00:38, 17 March 2023 ‎190 x 45 (hist | edit) ‎[902 bytes] ‎Peter wood (talk | contribs) (Created page with "190mm x 45mm is a common size for structural timber used in construction in Australia. It is often used as a joist, stud or bearer in residential and commercial building projects. Joists are horizontal structural members that support the flooring system, while studs are vertical structural members that support the walls. Bearers are horizontal structural members that support the weight of the structure above them, such as the walls and roof. 190mm x 45mm timber is typi...") Tag: Visual edit
00:34, 17 March 2023 ‎240 x 45 (hist | edit) ‎[808 bytes] ‎Peter wood (talk | contribs) (Created page with "240mm x 45mm is a common size for structural timber used in construction in Australia. It is often used as a joist or bearer in residential and commercial building projects. Joists are horizontal structural members that support the flooring system, while bearers are horizontal structural members that support the weight of the structure above them, such as the walls and roof. 240mm x 45mm timber is typically made from softwood species, such as pine or spruce, and is com...") Tag: Visual edit
00:32, 17 March 2023 ‎H6 (hist | edit) ‎[729 bytes] ‎Peter wood (talk | contribs) (Created page with "In the Australian timber industry, "H6" refers to a specific strength classification for treated softwood timber products. H6 timber has been treated with preservatives to protect it from decay and insect damage and is typically used for applications that require a high level of durability, such as in marine environments or for construction in ground contact. According to Australian standards, H6 timber has a minimum structural strength of F27, which means it has a bend...") Tag: Visual edit
00:28, 17 March 2023 ‎H5 (hist | edit) ‎[978 bytes] ‎Peter wood (talk | contribs) (Created page with "In Australia, H5 is a hazard level for treated lumber that indicates the level of protection against decay and insect attack. The H5 treatment is a heavy-duty treatment and is suitable for use in ground contact applications where the timber is exposed to severe decay and insect hazards, such as in marine environments. The H5 treatment process involves treating the lumber with a preservative that contains copper, azole fungicides, and a co-biocide. This treatment provide...") Tag: Visual edit
00:27, 17 March 2023 ‎H4 (hist | edit) ‎[956 bytes] ‎Peter wood (talk | contribs) (Created page with "In Australia, H4 is a hazard level for treated lumber that indicates the level of protection against decay and insect attack. The H4 treatment is a heavy-duty treatment and is suitable for use in ground contact and fresh water applications. The H4 treatment process involves treating the lumber with a preservative that contains copper, azole fungicides, and a co-biocide. This treatment provides protection against decay fungi, borers, and termites. H4 treated lumber is c...") Tag: Visual edit
00:25, 17 March 2023 ‎H3 (hist | edit) ‎[991 bytes] ‎Peter wood (talk | contribs) (Created page with "In Australia, H3 is a hazard level for treated lumber that indicates the level of protection against decay and insect attack. The H3 treatment is a medium-duty treatment and is suitable for use in above-ground, exterior applications where the timber is exposed to the weather but not in contact with the ground. The H3 treatment process involves treating the lumber with a preservative that contains copper, azole fungicides, and a co-biocide. This treatment provides protec...") Tag: Visual edit
00:21, 17 March 2023 ‎H2 (hist | edit) ‎[905 bytes] ‎Peter wood (talk | contribs) (Created page with "H2 is a hazard level for treated lumber that indicates the level of protection against decay and insect attack. The H2 treatment is a light-duty treatment and is suitable for use in above-ground, interior applications where the timber is not in direct contact with the ground or exposed to the weather. The H2 treatment process involves treating the lumber with a preservative that contains copper and an azole fungicide. This treatment provides protection against decay fun...")
00:18, 17 March 2023 ‎Light Organic Solvent Preservative (hist | edit) ‎[18 bytes] ‎Peter wood (talk | contribs) (Redirected page to LOSP) Tag: New redirect
00:13, 17 March 2023 ‎LOSP (hist | edit) ‎[523 bytes] ‎Peter wood (talk | contribs) (Created page with "LOSP stands for Light Organic Solvent Preservative. It is a type of preservative treatment used on lumber to protect it from decay and insect damage. The process involves using a light organic solvent to dissolve the preservative chemicals, which are then impregnated into the wood. The treated lumber is then dried, leaving the preservative chemicals embedded in the wood fibers. LOSP is typically used on interior or above-ground applications, as it is not as effective as...")
11:46, 16 March 2023 ‎Sound Tight Encased Knot (hist | edit) ‎[725 bytes] ‎Peter wood (talk | contribs) (Created page with "A sound tight encased knot in lumber is a knot that is fully surrounded by wood fibers, without any visible cracks or voids. This type of knot is also sometimes referred to as a "dead" knot or "encased" knot. Unlike sound tight knots, which may be visible on the surface of the wood, sound tight encased knots are completely surrounded by the surrounding wood fibers, creating a more uniform appearance.")
11:30, 16 March 2023 ‎Sound Tight Knot (hist | edit) ‎[620 bytes] ‎Peter wood (talk | contribs) (Created page with "A sound tight knot in lumber is a knot that is firmly held in place by the surrounding wood fibers and does not have any cracks or voids around it. This type of knot is usually considered to be structurally sound and can add character to the wood, while still maintaining its strength and integrity.")
11:22, 16 March 2023 ‎Knot Check (hist | edit) ‎[653 bytes] ‎Peter wood (talk | contribs) (Created page with "A knot check refers to a small crack or opening that develops around a knot in the wood. Knots are areas in the wood where branches or other parts of the tree have grown, and they can be harder and more dense than the surrounding wood. Over time, as the wood dries and shrinks, the knot may become loose or dislodged, leaving a small crack or opening around it. This opening is known as a knot check. Knot checks can occur in both softwood and hardwood lumber, and can vary...") originally created as "Knot check"
11:09, 16 March 2023 ‎Needle Trace (hist | edit) ‎[603 bytes] ‎Peter wood (talk | contribs) (Created page with "Needle trace refers to a pattern of small holes or marks on the surface of the wood that are caused by the needles of coniferous trees. Coniferous trees, such as pine, spruce, and fir, have needles rather than leaves, and these needles can leave behind small marks on the wood when the tree is cut into lumber. Needle trace is generally considered to be a cosmetic issue rather than a structural one, and does not typically affect the strength or durability of the wood. How...")
11:08, 16 March 2023 ‎Stain (hist | edit) ‎[870 bytes] ‎Peter wood (talk | contribs) (Created page with "Stain refers to a discoloration of the wood caused by fungi, bacteria, or other microorganisms that can grow on or within the wood. These microorganisms can cause a range of colors and patterns in the wood, ranging from brown, black, or blue stains to streaks or spots. Stain can occur in both living and dead trees, and can be caused by a variety of factors, including environmental conditions, such as temperature and moisture levels, and the presence of other organisms,...")
11:06, 16 March 2023 ‎Mechanical Damage (hist | edit) ‎[613 bytes] ‎Peter wood (talk | contribs) (Created page with "Mechanical damage refers to damage that is caused by physical forces, such as impact, crushing, bending, or cutting. This type of damage can occur during the handling, transportation, or processing of the wood. Mechanical damage can take many forms, including dents, scratches, cuts, splits, or crushing of the wood fibers. It can affect the appearance and structural integrity of the wood, making it weaker or more prone to breaking or splitting. To prevent mechanical dam...")
11:05, 16 March 2023 ‎Want (hist | edit) ‎[152 bytes] ‎Peter wood (talk | contribs) (Created page with "Want is the absence of wood from the surface or arris that is caused by something other than wane. Usually damage done during the manufacturing process.")